NON-TOXIC FIRE RETARDANT
NT DECO is a pH-neutral, water-based and low-VOC fire retardant. It is available in thousands of translucent tones for interior and exterior use. The product is typically used for fire protection of cladding, bearing elements and interior wood products in multistorey buildings.
NORDIC HUES 2020 TONE COLLECTION
The Nordic Hues 2020 tone collection includes the most popular translucent tone options for fire protection of visible wood structures. On request, NT DECO fire retardant can be supplied in any other tone, too.
Natural Shades
The colours displayed on the screen are digitally produced to match the colour on a planed spruce panel. Digitally produced colours are no substitute for real colour samples because our perception of colour is affected by e.g. wood species, surface finish, gloss, lighting conditions, etc. Please make sure you choose the final colour using treated wood panel samples available free of charge from Nordtreat.
ORDER COLOUR SAMPLES OF THE NORDIC HUES 2020 TONE COLLECTION OR YOUR OWN TONES!
ORDER COLOUR SAMPLES OF THE NORDIC HUES 2020 TONE COLLECTION OR YOUR OWN TONES!
NT DECO PRODUCT FEATURES
KEY PRODUCT FEATURES
- Euroclass: B-s1,d0 (EN13501-1)
- M1 emission class
- Indoor Air Comfort ® certified
- BREEAM classified
- LEED v4 compliant
- WeatherGuard weather protection
- UV protection (for toned colors)
PACKAGING OPTIONS
- 1000 litre IBC
- 10-200 litre drum
- 3-25 litre canister
CERTIFICATES
NT DECO has been tested and classified according to:
EN 11925-2:2010EN 13823:2010
EN 13501-1
EN ISO 1182
CEN/TS 16516
EN 16755 (NT FIRE 054)
DOCUMENTS
MATERIAL SAFETY DATASHEETTECHNICAL DATASHEET
NT DECO is suitable for CE marking wooden claddings and panels according to EN 14915:2013.
CONTACT SALES OR TECHNICAL SUPPORT FOR MORE INFORMATION →NT DECO MAINTENANCE INTERVAL
The maintenance interval for solid wood panels and cladding treated with Nordtreat fire retardants is 5 to 15 years, depending on the structure, weather exposure and treatment method.
In indoor use, industrially treated, certified panel products as well as wooden surfaces treated during the construction phase, in accordance with the manufacturer’s instructions, will maintain their fire protection properties throughout their life cycle, unless the surfaces are mechanically damaged.
In outdoor use, industrially treated, certified wood products as well as those treated during the construction phase, in accordance with the manufacturer’s instructions, will require a re-treatment after 5 to 15 years. The re-treatment must be done using the same fire retardant that was originally used to treat the wood product.
For more information about Nordtreat maintenance and on-site treatment instructions, please contact Nordtreat’s technical experts.
|
|
|
|
|
|
|
|
